WEB Wiring Requirements For 4 Wire Stations
Three Common Wires and One Unique Signal Wire Per Apartment
When wiring a 4-wire apartment station, there are three common wires and one unique signal wire that must be connected. The three common wires are: ground, power, and audio. The unique signal wire is used to transmit a signal from the station to the central controller.
Ground Wire
The ground wire is used to connect the station to the ground. This wire is typically green or bare copper.
Power Wire
The power wire is used to connect the station to the power supply. This wire is typically black.
Audio Wire
The audio wire is used to transmit audio signals from the station to the central controller. This wire is typically red or white.
Signal Wire
The signal wire is used to transmit a signal from the station to the central controller. This wire is typically blue or yellow.
Wiring Diagram
A typical wiring diagram for a 4-wire apartment station is shown below.
Tips
Here are a few tips for wiring a 4-wire apartment station:
- Use the correct gauge wire for the application.
- Use a wire stripper to remove the insulation from the wires.
- Twist the wires together and solder them.
- Use a crimping tool to crimp the wires to the terminals on the station.
- Test the station to make sure it is working properly.
Comments